Menu
Your Cart

Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808

Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808
Curtiss-Wright XP-55 Ascender, WWII 1/48 ModelSvit 4808

Manufacturer: ModelSvit (Ukraine)

Code: 4808

Scale: 1/48

Material: Plastic

Parts: 141

Weight: 0.270kg

Gross weight: 0.420kg

Volume: 0.960kg

Minimum age For modellers:  14+

Paint: Unpainted, Unassembled, Kit do not contain paints and glue.

Condition: New in Box

The length of the model in mm: 260

Wing span, mm: 188

 

Curtiss-Wright XP-55 Ascender - in the 1940s, was the prototype of the United States fighter, made by the Curtiss-Wright company.

In late ‘30s, US Army Air Corp announced tender for aircraft with improved performance, armament, and pilot visibility over existing fighters. 

 

All selected finalists came up with the concept of a pushing engine. Curtiss-Wright’s concept had a canard configuration with swept wing.

 

On 22 June 1940, the Curtiss-Wright company received an Army contract for preliminary engineering data and a powered wind tunnel model. The USAAC was not completely satisfied with the results of these tests, and Curtiss-Wright took it upon itself to build a flying full-scale model, which it designated 24B (or CW24B). The flying model was originally built on a   1:1 scale. After checking the results in June 1942, a contract was issued for the construction of 3 prototypes.

 

The new fighter received the designation XP-55 "Ascender". It represented all-metal monoplane with a rear-mounted engine, swept wing, and two vertical tails. In the tail section behind the pilot's cabin was located the Allison V-1710-90 water-cooled engine with a take-off power of 1,275 hp. The three-bladed propeller had ability to be ejected in emergency situation. The air intake above the engine and the radiator below formed a vertical fin.

 

The first “Ascender” prototype flew on July 13, 1943. Initial testing revealed that the takeoff run was excessively long. To solve this problem, the nose elevator size was increased and the aileron up trim was interconnected with the flaps so that it operated when the flaps were lowered. On November 15, 1943 this plane was destroyed during tests of stall performance.

 

The second prototype was similar to the first but with a slightly larger nose elevator and modified elevator tabs. It flew for the first time on 9 January 1944. All flight tests were restricted so that the stall zone was avoided.

 

The third prototype received 4 machine guns and  aerodynamic improvements. It maiden flight took place on April 25, 1944. Designers revealed crucial disadvantage of the used aerodynamic scheme- insufficient stability. It crashed on May 27, 1945 during an air show.

 

 By the end of 1944 jet-powered fighter aircraft were already well along in development and there was no further development of the XP-55, so it  program was closed.

 

The second prototype, currently being in the US National Air and Space Museum of Washington was used as a master model for our scale-kit.  

 

The complete kit includes:

141 plastic parts

decal (sticker)

photo etching

1 frame is made of transparent plastic (cabin light)

scheme for coloring model

detailed instruction in Russian and English languages

 

General Product Info
Material NOT SET
Scale 1/48
Type NOT SET

We have the lowest worldwide shipping. And it's totally simple.

EUROPE, USA, CANADA
TURKEY, ISRAEL, EGYPT, UE
CHINA, JAPAN, HK, S.KOREA
AU NZ MX
South America, Asia
Order weight up to 0.22kg or 0.48lbUS$ 8.90US$ 8.90
Order weight up to 0.44kg or 0.97lb
US$ 13.95
US$ 17.90
Order weight over 0.44kg or 0.97lb
US$ 19.99
US$ 29.99
Order total over $150
FREEUS$ 29.99
PROMO US$ 19.99



Shipping to some countries not qualifies for the free shipping option but costs not over $29.99 for any sized order. Sorry for that, your location is too far.

Write a review

Note: HTML is not translated!
Bad Good
  • Stock: 3
  • Model: MSVIT4808
  • DATE ADDED: 07/08/2019
Products Sold: 12
PURCHASE REWARD
You will earn 230 points equal $2.30.

You can spend them with your next purchase. More...
$45.99
Price in reward points: 4599